The 2025 accident analysis for the light-industry and textile sector recorded more than 100 typical cases, with machinery entanglement, dust exposure, and prolonged noise among the leading causes of injury and occupational health concerns. Many incidents occurred during spinning, weaving, dyeing, and finishing, highlighting gaps in hazard assessment and PPE planning.
Mechanical injury remains a major risk, particularly around high-speed looms and winding equipment. Severe injuries can occur when guards are inadequate or removed for maintenance or cleaning. The recurring removal of guards points to weaknesses in lockout, procedures, and supervision.
Dust is a significant concern in cotton spinning and synthetic-fiber processing. Long-term exposure can contribute to respiratory disease, including pneumoconiosis. Ventilation remains the primary control, but where residual exposure remains, workers need appropriately rated respiratory protection that is worn correctly.
Textile workshops may also exceed 85 dB, creating a risk of permanent hearing loss. Earplugs or earmuffs must provide suitable attenuation for the measured noise while remaining comfortable enough for consistent use. Over- or under-attenuation can both create problems.
PPE should be reviewed as job hazards change. Procurement and safety teams should consider the process, exposure duration, and hazard level, then verify that the selected equipment provides the intended protection. High-dust tasks require suitable respiratory protection; high-noise tasks require hearing protection selected from measured exposure and wearer needs.
PPE training and supervision should ensure that equipment is actually used and used correctly. Reminder signs, routine inspections, and practical drills can reinforce proper use. Companies should also gather feedback from workers on comfort and usability and use it to improve product selection and long-term compliance.
Head, hearing, and respiratory protection are key PPE categories in light-industry and textile operations. A one-size-fits-all approach should be avoided; PPE should be matched to each task and integrated into the site's overall safety-management system.
News source:Ministry of Emergency Management of the People's Republic of China, 2026-04-07: '2025 Light Industry and Textile Industry Production Safety Accident Analysis 2026-04-07 18:28'. This article only interprets PPE knowledge based on public news topics.
